Application
Apply to clean, dry, smooth, flat surfaces, at least 20mm wide to enable full contact. Apply above +18°C. Do not touch the adhesive or surfaces to which strips are to be applied. In case of painted walls, ensure paint is well bonded to the wall. For best results clean surfaces with methylated sprit. Surfaces must be strong enough to support the weight of the items to be held. Apply strips without air-bubbles to the substrate and remove yellow protectiveliner. Press item to be bonded firmly into place. Support heavier items for 24 hours.
Direct contact with water can reduce holding power. Final strength is reached after 24h.
For mounting of objects with a thickness >10mm, holding power per strip is reduced. To fix larger objects (thickness >10mm, weight >2kg) use more strips.
How to Remove the Strips
Split the strips by drawing a strong thread behind the mounted object. Care should be taken when removing
breakable items. The remaining foam can then be easily peeled off.