UniBond UltraForce Wall Tile Adhesive Bucket

Features and Benefits

UniBond UltraForce Wall Tile Adhesive is a ready mixed, thin-bed tile, wall adhesive in a bucket. It is perfect for the interior fixing of porcelain, glazed ceramic and natural stone wall tiles up to 600 x 300mm.

Characteristics

  • Ready mixed
  • UltraForce Fibre technology for ultimate durability
  • Reduced slip formula
  • Waterproof
  • Lifetime guarantee

 

 

Suitable for: Porcelain, glazed ceramic and natural stone wall tiles up to 600mm x 300mm

Colours available: Beige

Coverage: Approx.11m²

Size: available in both 6.9kg and 13.8kg formats

Read More

Documents and Downloads

Additional Documents

How to Use

  1. Walls must be flat, rigid, dry and clean. 
  2. Mark a horizontal line one tile plus one grout space, from the bottom of the area to be tiled.
  3. Use a plumb line to mark a vertical line down the centre of the wall. Adjust as necessary to avoid awkward or thin cuts. Begin tiling at the intersection of the lines.

APPLICATION OF ADHESIVE:

  1. Apply the adhesive of the wall using a tiling trowel
  2. Fix tiles within 30 minutes of spreading the adhesive. Bed the tiles firmly using a twisting action. Use tile spacers to ensure evenly spaced grout lines. Remove excess adhesive immediately with a damp cloth.
  3. Tile small areas at a time finishing with the bottom row

GROUTING:

Leave ceramic tiles for at least 24 hours before grouting. For porcelain, large tiles and when tiling over existing tiles, leave for a least 72 hours or, until the adhesive has fully dried.