UniBond Repair Epoxy Wood

Features and Benefits

UniBond Repair Epoxy Wood is a fast-setting, two component epoxy adhesive - packaged in a twin chamber syringe. It's ideal for strong, quick bonding and repairing of both hardwoods and softwoods. It's also great for bonding wood to other common surfaces.*

Characteristics

25ml
Reactive, fast, non-shrinking epoxy (5 minute)
Two components, 1:1 mix ratio
Initial set 5 minutes
Waterproof and temperature resistant -30°C to +150°C (max +60°C for load bearing bonds)
Cured material can be machined (sanded, drilled) and painted
Ideal for bonding and repairing hardwoods and softwoods, such as pine, ash, beech, mahogany, oak, sapele, teak, plywood and MDF
It is also suitable for bonding wood to other common surfaces, such as wood, leather, metal, glass, ceramics and most plastics

*Not suitable for bonding polypropylene (PP), polyethylene (PE) and PTFE.

Additional Documents

TDS

Download Document

English

How to Use

Pull out re-sealable cap from syringe plunger and snap off tab from tip of syringe nozzles. Push down plunger slowly to dispense adhesive onto a clean, non-absorbent surface. Only dispense as much adhesive as required. Fix re-sealable cap onto syring nozzles.
Mix adhesive thoroughly using the spatula provide and use immediately.
Apply adhesive carefully to one surface to be bonded. Push both surfaces together firmly. Remove excess adhesive immediately with methylated spirit.
Use self-adhesive tape or clamps to hold in position. Bonded items can be handled after 15 minutes.

Allow 4 hours before rough handling.