- Pull out re-sealable cap from syringe plunger and snap off tab from tip of syringe nozzles. Push down plunger slowly to dispense adhesive onto a clean, non-absorbent surface. Only dispense as much adhesive as required. Fix re-sealable cap onto syring nozzles.
- Mix adhesive thoroughly using the spatula provide and use immediately.
- Apply adhesive carefully to one surface to be bonded. Push both surfaces together firmly. Remove excess adhesive immediately with methylated spirit.
- Use self-adhesive tape or clamps to hold in position. Bonded items can be handled after 15 minutes.
Allow 4 hours before rough handling.