Easily restore and refresh old grout that has become faded and discoloured.
- Suitable for restoring grout lines in glazed ceramic, porcelain and other non porous wall and floor tiles in interior locations
- 125ml (Ice White)
Store in cool dry conditions. Protect from frost and direct sunlight.
Project check list
- No special tools required
Step by Step
Hints and Tips:
1. Less is best – It is better to apply two thin coats of UniBond Grout Reviver than one thick coat.
1. Preparation is the key – Completely remove dirt, mould and contaminants e.g shower gels and soaps.
2. Shake the pack before use and depress the nib several times until the product flows.
3. Apply directly to the joint in a think even coat.
4. Remove any excess immediately with damp cloth.
5. Apply second coat if needed.