UniBond Repair Epoxy Plastic

Features and Benefits

UniBond Repair Epoxy Plastic is fast-setting, two-component epoxy adhesive packaged in a twin chamber syringe. It's ideal for strong, quick bonding and repairing of most plastics. It is also suitable for bonding most plastics* to other common surfaces such as wood, leather, metal, glass and ceramics.

Characteristics

25ml
Solvent free, fast setting, non-shrinking epoxy adhesive
Two components, 1:1 mix ratio
Initial set 5 minutes
Waterproof and temperature resistant -30°C to +150°C (Max +60°C for load bearing bonds)
Cured adhesive can be sanded, drilled, machined and painted

MATERIAL SUITABILITY

It is suitable for bonding most plastics, such as modified polystyrene (ABS etc.), rigid PVC, polystyrene (PS), polycarbonate (PC), acrylic and fiberglass. Not suitable for bonding polypropylene (PP), polyethylene (PE) and PTFE.
It is also suitable for bonding most plastics to other common surfaces such as wood, leather, metal, glass and ceramics.

Additional Documents

TDS

Download Document

English

How to Use

Pull out re-sealable cap from syringe plunger and snap off tab from tip of syringe nozzles. Push down plunger slowly to dispense adhesive onto a clean, non-absorbent surface. Only dispense as much adhesive as required. Fix re-sealable cap onto syring nozzles.
Mix adhesive thoroughly using the spatula provide and use immediately.
Apply adhesive carefully to one surface to be bonded. Push both surfaces together firmly. Remove excess adhesive immediately with methylated spirit.
Use self-adhesive tape or clamps to hold in position. Bonded items can be handled after 15 minutes.

Allow 4 hours before rough handling.