Key Facts

Product Introduction:

Ready mixed combined wall tile adhesive & grout for small jobs such as splash backs.


Application:

  • Suitable for dry and intermittently wet areas
  • For repairing ceramic wall tiles and small areas such as splash backs
  • For interior use

Content: 

  • 300g (White)

Storage:

Store in cool dry conditions. Protect from frost and direct sunlight.

Project check list

  • Grout Smoother tool
  • Damp sponge
  • Bucket of clean water

Step by Step

Fixing Tiles:

1. Ensure the surface to be tiled is even, sound and dry.

2. Apply the adhesive to the wall in horizontal beads 15-20mm apart (Do not apply greater than 3mm bed thickness).

3. Work in manageable areas of about 1m₂ to ensure adhesive doesn’t dry out – Fix tiles within 30 minutes of spreading adhesive.

4. Use tile spacers to position the tiles evenly and accurately.

5. Remove any surplus adhesive immediately with damp cloth.

Grouting:

1. Do not start grouting until the adhesive is fully dry.

2. Press the grout into the joints with a grout float.

3. Ensure that the joints are completely filled.

4. Smooth off the grout lines with a grouting tool.

5. Immediately remove the excess grout with a damp cloth.

6. Allow to dry for 24 hours then polish the tiles with a clean cloth – ensure that the grout is fully dry before allowing water contact.

*For guidance only, please refer to pack for more concise instructions.